Eurovan MV V6-2.8L (AXK) (2002)
-
Remove engine cover -1-. To do so, remove 3 bolts (arrows).
-
Remove intake hose between Mass Air Flow (MAF) sensor -G70- and throttle valve control module -J333-
-
Remove radiator grill
-
Remove securing bolts for lock carrier -1- at left and right.
-
Fold out lock carrier with radiator toward the front (arrow).
-
Unclip cover for ignition coils with power output stage.
-
Disconnect connector (arrows) to ignition coils with power output stage and move wiring harness clear.
-
Remove ignition coils using T10094 extractor.
-
Remove spark plugs using 3122 B spark plug removal tool.
-
Check compression using VAG1763 compression tester.
Note: Using VAG1381 or VAG1763 compression tester.
-
Activate starter until no further pressure increases are indicated by VAG 1381 or VAG 1763 compression tester.
Compression values:
New: 10 to 13 bar positive pressure.
Wear limit: 7.5 bar