Eurovan MV V6-2.8L (AXK) (2002)
Crankshaft: Service and Repair
Sensor Wheel (For Engine RPM) Installing
Crankshaft, removing and installing
Install sensor wheel on crankshaft
Make sure the crankshaft /sensor wheel contact surface is free of oil and grease.
-
For additional securing, thinly coat contact surface of crankshaft/sensor wheel with locking fluid "D6".
-
First lightly tighten all new securing bolts by hand.
-
Tighten securing bolt -1- to 10 Nm plus 1/4 rotation (90 °) additionally.
-
Now tighten securing bolts -2- to 10 Nm and 1/4 rotation (90°).