Eurovan MV V6-2.8L (AXK) (2002)
Oil Pan: Service and Repair
Oil pan, removing and installing
Special tools and equipment
-
VAG1331 torque wrench (5 to 50 Nm)
-
D 176 404 A2 silicon sealant
-
Drill with plastic brush attachment
-
Scraping tool
Removing
-
Remove noise insulation pan:
-
Drain engine oil.
Note: Observe disposal regulations.
-
Unbolt oil pan.
-
It may be necessary to loosen oil pan by hitting it lightly with a rubber mallet.
-
Remove any remaining sealant from cylinder block using a scraping tool.
-
Remove remaining sealant at oil pan using a rotating brush, e.g. a drill with plastic brush attachment (wear protective glasses).
-
Clean sealing surface. They must be completely free of oil and grease.
Installing
Notes:
-
Note expiration date for sealant.
-
The oil pan must be installed within 5 minutes after application of silicon sealant.