Eurovan MV V6-2.8L (AXK) (2002)
-
Pull plug out of filler pipe.
Note:
On some transmissions a cap with a spring retainer is installed. This cap can be used again.
-
Fill with ATF using VAG 1924 until ATF runs out of level hole.
Note: An insufficient ATF filling as well as filling to excess affects the function of the transmission.
-
Install new seal -arrow 1- to plug and tighten to 15 Nm
-
Install sealing plug on filler pipe until the spring retainer lock locates, or
-
Install plug on filler pipe and secure with a new cap -arrow 2-.
-
Lock cap.
Note: Always replace cap. The cap secures the sealing plug.