Eurovan MV V6-2.8L (AXK) (2002)
-
Press buttons -0- and -5- to select function 05 "Erase DTC memory",
Indicated on display:
Rapid data transfer
Q
05 - Erase DTC Memory
-
Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer
->
DTC Memory is erased!
DTC memory is erased.
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
NOTE:
-
Test sequence is wrong if this message is displayed.
WARNING!
DTC memory was not checked
-
Test sequence is wrong if this message is displayed.
Rapid data transfer
->
DTC memory was not checked
Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.
End Output (function 06)
-
Press buttons -0- and -6- to select function 06 "End Output".
Indicated on display:
Rapid data transfer
Q
06 - End Output
-
Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer
HELP
Enter address word XX
-
Switch off ignition.
-
Disconnect Data Link Connector (DLC)
Without Manufacturer Scan Tool
The manufacturer does not provide a procedure for clearing diagnostic trouble codes without a scan tool.
Diagnostic Trouble Code Tests and Associated Procedures
For information regarding diagnosis of all B, C, P, U and Manufacturer Codes - See: Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures
Component Tests and General Diagnostics
Terminal Resistance For Can-Bus, Checking