Eurovan MV V6-2.8L (AXK) (2002)
/Page-701002.png)
-
Check intake of mass air in display field 4.
Display Group 2
-
If the specified value is not obtained or there is still a DTC in DTC memory regarding the Mass Air Flow (MAF) sensor, check voltage supply and
the signal and Ground (GND) wire of the Mass Air Flow (MAF) sensor.
If specified value is obtained:
-
Press the -> button.
-
Press buttons -0- and -6- to select "End Output" function 06. Press -Q- button to confirm input.
-
Switch ignition off.
Evaluation display group 2, display field 4 mass air taken in
Voltage supply for Mass Air Flow (MAF) sensor, checking
