Eurovan MV V6-2.8L (AXK) (2002)
/Page-569005.png)
-
Connect VAG1598/31 test box to control module wiring harness. Engine Control Module (ECM) is not connected.
-
Disconnect 5-pin connector from Mass Air Flow (MAF) sensor -G70- with Intake Air Temperature (IAT) sensor -G42- (arrow).
-
Check wires between test box and 5-pin connector for open circuits according to wiring diagram.
Terminal 1 + socket 26
Terminal 3 + socket 27
Wire resistance: max: 1.5 Ohms
-
Also check wire for short circuit to B+. Specification: Infinity Ohms
If no malfunctions are found in wire:
