Eurovan MV V6-2.8L (AXK) (2002)
Ignition Switch Lock Cylinder: Service and Repair
Lock Cylinder, Removing and Installing
Lock Cylinder, Removing And Installing
Removing
-
Removing steering/ignition lock housing
-
Mark steering lock housing for drilling
a
=
12 mm
b
=
10 mm
-
Drill steering lock housing with 3 mm drill until lock cylinder spring is evident (hole depth approx. 3 mm).
-
Using opposite end of drill compress lock spring and pull out lock cylinder.
Installing
CAUTION!
The original steering/ignition lock housing must not be reinstalled
-
Push lock cylinder onto steering lock housing.
-
By slightly turning key in lock cylinder it can be pushed onto the stop.