Eurovan MV V6-2.8L (AXK) (2002)
-
Press the -> button.
-
Press buttons -0- and -6- to select "End Output" function 06. Press -Q- button to confirm input.
-
Switch ignition off.
-
Replace Mass Air Flow (MAF) sensor -G70-.
-
Check DTC memory, repair any malfunctions and then erase DTC memory.
If indication remains approx. -40.0 °C:
-
Press the -> button.
-
Press buttons -0- and -6- to select "End Output" function 06. Press -Q- button to confirm input.
-
Switch ignition off.
-
Check wires according to wiring diagram.
Continuation of test if indication is approx.141 °C:
-
Disconnect 5-pin connector from Mass Air Flow (MAF) sensor -G70- with Intake Air Temperature (IAT) sensor -G42- (arrow).
If indication jumps to approx. -40.0 °C:
-
Press the -> button.
-
Press buttons -0- and -6- to select "End Output" function 06. Press -Q- button to confirm input.
-
Switch ignition off.
-
Replace Mass Air Flow (MAF) sensor -G70-.
-
Check DTC memory, repair any malfunctions and then erase DTC memory.
If indication remains approx. -40.0 °C:
-
Press the -> button.
-
Press buttons -0- and -6- to select "End Output" function 06. Press -Q- button to confirm input.
-
Switch ignition off.
-
Check wires according to wiring diagram.
Checking wiring