Eurovan MV V6-2.8L (AXK) (2002)
/Page-1135001.png)
Relay Box: Service and Repair
Multi-Pin Connectors of Fuse/Relay Panel, Remove/Install
Multi-pin Connectors Of Fuse/relay Panel, Removing And Installing
Removing
-
Pull retaining slide -1- on rear of fuse/relay panel out of housing -arrow- as far as possible (about 5 mm).
-
Depress retaining lug on multi-pin connector -arrow- and pull out of socket.
Installing
NOTE: Insert connector so locking pin -2- faces locking slide -1-.
