Eurovan MV V6-2.8L (AXK) (2002)
Fig. 1 Driving spring pin (arrow) out and in Driving out
- Drive spring pin for engaging lever out only so far as to remove the selector shaft.
Note:
Otherwise spring pin of engaging lever may drop into planetary transmission.
Driving in
- Drive in spring pin flush after inserting selector shaft and engaging lever.
Fig. 2 Removing and installing selector shaft with selector segments
With valve body installed do not damage the conductor strip.
- Remove selector segment spring -A-.
- Remove screw with washer (arrow).
The washer prevents selector shaft movement.
Fig. 3 Inserting guide plate and supporting plate