Eurovan MV V6-2.8L (AXK) (2002)
^
Unbolt flanged shaft bearing -A- from transmission mount -B- (arrow).
^
Pull right-hand flange shaft -C- out from intermediate shaft -D-.
^
Take O ring out from intermediate shaft.
^
Remove stub shaft.
A - Separating device Kukko 17/0
B - Separating device Kukko 17/1
1 - Bolt M10 x 80 (city. 2)
^
Turn bolts -1- evenly against separating device -B-.
^
Pull out oil seal with VW 681.
^
Half fill space between sealing lip and dust lip with grease G 052 128
^
Drive in oil seal as far as stop with VW 195.
^
Clamp stub shaft in vice using protective pads.