Eurovan MV V6-2.8L (AXK) (2002)
Torque Converter: Application and ID
Torque converter
ATF pump is driven via the torque converter.
When installing the torque converter, make sure that both drive pins engage in the recesses in the ATF pump inner wheel.
There are different types of torque converter, which can be identified by the code letters (arrow).
(Transmission installed)
Torque converter, identification
There are different types of torque converter.
Current torque converter with sleeve bearing in turbine shaft of transmission.
New torque converter with integrated needle bearing.
Identification is by means of the code letters.
The current torque converter may only be installed in the transmission with a sleeve bearing in the turbine shaft. It can be identified by the fourth
letter, which is either a B. C, R. T or V.
Example (arrow) is a "C".
The new torque converter may only be installed in the transmission without a sleeve bearing in the turbine shaft. It can be identified by the fourth
letter, which is either a D, H. or J.