Eurovan MV V6-2.8L (AXK) (2002)
Windshield Washer Spray Nozzle: Service and Repair
Washer Jets, Removing And Checking
Removing
-
Unclip trim underneath front hood
-
Release rubber seal -arrow- and pull jet downwards from hood.
Checking
NOTE:
-
Washer jets are pro-set at the factory and cannot be adjusted. Check only.
-
The fan spray of the jet must contact the upper third of the windshield.
CAUTION!
Washer jets must not be cleaned opposite to the spray direction, e.g.: blown through from front.