GLI L4-2.0L Turbo (BPY) (2008)
Front Subframe: Specifications
Subframe Mount
Engine mount
A = 20 Nm + 90° (1/4 turn)
-
Replace bolts
B = 40 Nm + 90° (1/4 turn)
-
Replace bolts
C = 60 Nm + 90° (1/4 turn)
-
Replace bolts
Transmission assembly mount
1 = 40 Nm + 90° (1/4) turn
-
Replace bolts
2 = 60 Nm + 90° (1/4) turn
-
Replace bolts
Pendulum supports
A strength category 8.8 = 40 Nm + 90° (1/4 turn)
-
Replace bolts
A strength category 10.9 = 50 Nm + 90° (1/4 turn) 1)
-
Replace bolts
B = 100 Nm + 90° (1/4 turn
-
Replace bolts
Removing First remove bolt - B -, then bolts - A -.