GLI L4-2.0L Turbo (BPY) (2008)
Trim Panel: Service and Repair
Pillar and Side Trim
Upper A-Pillar Trim
Pillar and Side Trim
Upper A-Pillar Trim
‹› Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Remove side instrument panel cover. Refer to --> [ Side Instrument Panel Covers ] See: Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement.
-
Remove center A-pillar trim. Refer to --> [ Center A-Pillar Trim ] See: Center A-Pillar Trim.
-
Remove emblem for airbag - 1 - and remove bolt - 2 - (3.5 Nm).
-
Remove trim in area of mounting clip - 3 - from mounts - arrow A -.
-
Remove trim from door seal piping.
-
Pull trim out of front mount - arrow B -.
-
Remove trim in rear area from instrument panel - arrow C -.
‹› When re-installing, emblem for airbag - 1 - must be replaced.
‹› Before installing, inspect the securing clips for damage and replace if necessary.