GLI L4-2.0L Turbo (BPY) (2008)
-
Install the oil pump chain sprocket and tighten the bolt by hand.
‹› The oil pump chain sprocket fits only in one position. To install, only the oil pump must be turned.
-
Remove the (T10027) and 3 mm hex wrench - 1 -. Tighten the oil pump chain sprocket bolt.
‹› Tightening specification: 20 Nm + 90° (1/4) additional turn
-
Center bolt of the vibration damper can be counter held.
Balance Shaft Gear Bolt Allocation