GLI L4-2.0L Turbo (BPY) (2008)
Valve Cover: Service and Repair
Cylinder Head Cover
Special tools, testers and auxiliary items required
‹› Torque wrench (5-50 Nm) (VAG 1331)
‹› Spring type clip pliers (VAS 5024A)
‹› Ignition coil puller (T40039)
Removing
-
Remove the engine cover/upper air filter housing. Refer to --> [ Engine Cover/Upper Air Filter Housing ] See: Tune-up and Engine Performance
Checks/Air Cleaner Housing/Service and Repair/Engine.
-
Remove the bolts - arrows -.
-
Remove the ignition coils with power output stages. Refer to --> [ Ignition Coils with Power Output Stages ] See: Powertrain Management/Ignition
System/Ignition Coil/Service and Repair.
-
Disconnect the Evaporative Emission (EVAP) line - 1 - from the cylinder head cover.
-
Remove the crankcase ventilation valve housing bolts - arrows - from the cylinder head cover.
-
Remove the crankcase ventilation line bolts - 1 - and heat shield from the turbocharger.