GLI L4-2.0L Turbo (BPY) (2008)
Oil Filter Adapter: Service and Repair
Oil Filter Bracket
Oil Filter Bracket
Removing
-
Remove intake manifold.
-
Disconnect coolant pipes.
-
Remove oil cooler. Remove bolts - A - and - B - to do so.
-
Disconnect connector - A - from oil pressure switch and remove bolt - B - for Ground (GND) wire.
-
Remove mounting bolts - arrows - and remove oil filter bracket.
Installing
-
Replace gaskets and.
-
Insert baffle plate.
-
Install oil filter bracket and tighten bolts uniformly to 15 Nm.
-
Install oil cooler with bracket for coolant pipes.
The rest of the assembly is basically a reverse of the disassembling sequence.