GLI L4-2.0L Turbo (BPY) (2008)
‹› Ensure sufficient clearance to surrounding components.
‹› Coolant hose connection diagram, refer to --> [ Coolant Hose Connection Diagram ] See: Cooling System/Diagrams.
7
Gasket
‹› Always replace.
8
Bolt, 15 Nm
9
Seal
‹› Always replace.
‹› Insert when lubricated.
‹› Service flag upward.
10
Cap
11
Oil Filter Housing, 25 Nm
‹› Remove and install using the oil filter wrench (3417).
‹› Draining, refer to --> [ Oil Filter Housing, Draining ] See: Oil Filter Housing/Service and Repair/Procedures.
12
Oil Filter Element
‹› Drain the oil filter housing before removing, refer to --> [ Oil Filter Housing, Draining ] See: Oil Filter Housing/Service and
Repair/Procedures.
‹› Replacing.
13
Oil Baffle
14
Gasket
‹› Always replace.
15
Oil Filter Bracket
‹› With the pressure relief valve, approximately 4 bar.
‹› Removing and installing, refer to --> [ Oil Filter Bracket ] See: Oil Filter Bracket.
16
Spring Type Clip