GLI L4-2.0L Turbo (BPY) (2008)
Oil Line: Service and Repair
Turbocharger Coolant Inlet, Oil Inlet and Return Lines Assembly Overview
1
Seal
‹› Always replace.
2
Banjo Bolt. 30 Nm
3
Oil Supply Line
‹› With heat shield.
4
Turbocharger
‹› Removing and installing, refer to --> [ Turbocharger ] See: Powertrain Management/Fuel Delivery and Air Induction/Turbocharger/Service
and Repair/Turbocharger.
5
Bolt, 9 Nm
6
Banjo Bolt, 30 Nm
7
Seal
‹› Always replace.
8
Banjo Bolt, 35 Nm
9
Seal