GLI L4-2.0L Turbo (BPY) (2008)
-
Remove the charge air pipe bolt - 2 -.
-
Remove the oil return line bolts - arrows -.
-
Disconnect the electrical connector - 1 - for the oil level thermal sensor if the vehicle has a service interval display.
-
Remove the transmission/oil pan - arrows - bolts.
-
Loosen the oil pan bolts on the flywheel side using the (3185) and remove the using (T10058).
-
Remove the remaining bolts and remove the oil pan. Loosen the oil pan with light blows of a rubber headed hammer if necessary.