GLI L4-2.0L Turbo (BPY) (2008)
A M7 x 40
B M7 x 70
C M7 x 90
D M7 x 55
E
Sealing plug with O-ring
The rest of the assembly is basically a reverse of the removal sequence.
-
Install the oil pan. Refer to --> [ Oil Pan ] See: Engine Lubrication/Oil Pan/Service and Repair/Oil Pan.
Chain Tensioner Pre-Tensioning
-
Preload the piston - arrow - by hand.
-
Push the tensioning rail in the - direction of the arrow - and secure it with a 3 mm hex wrench - 1 - across flats.