GLI L4-2.0L Turbo (BPY) (2008)
7
Woodruff Key
‹› Check for secure seating.
8
Nut, 25 Nm
9
Semi Automatic Tensioner Roller
10
Coolant Pump
‹› Removing and installing refer to --> [ Coolant Pump ] See: Water Pump/Service and Repair.
11
O-ring
‹› Always replace.
12
Bolt, 25 Nm
13
Damper Roller
14
Bolt, 15 Nm
15
Bolt, 35 Nm
16
Damper Roller
17
Sealing Flange
18
Diamond Disc
‹› Always replace.
19
Crankshaft Toothed Belt Gear
‹› There must be no oil on the contact surface between the toothed belt gear, diamond disc and crankshaft.
‹› Only possible to install in one position.
20
Bolt, 90 Nm + 90° (1/4) additional turn
‹› Always replace.
‹› Do not lubricate.
‹› Use the counter support (3415) to loosen and tighten.
21
Toothed Belt
‹› Before removing, mark the direction of rotation using chalk or a felt tip marker.
‹› Check for wear.
22
Lower Toothed Belt Guard
23
Bolt, 8 Nm
‹› For the lower toothed belt guard.
‹› Quantity: 7.
24
Engine Mount Bracket
25
Bolt, 45 Nm