GLI L4-2.0L Turbo (BPY) (2008)
/Page-471007.png)
-
Remove the drive axles from transmission.
-
Disconnect the Air Conditioning (A/C) lines from the body - arrows -.
‹› Do not open the A/C system.
-
Remove the engine mount bracket bolts - arrows - and remove the engine mount completely.
CAUTION!
Make sure that no components/hoses are damaged, overstretched or torn when lifting the engine using the (10-222A).
-
Lift the engine using the (10-222A) far enough until both upper bolts - 1 and 2 - for the engine mount bracket can be loosened and removed.
