GLI L4-2.0L Turbo (BPY) (2008)
Control Assembly: Service and Repair
Heating and Ventilation System
Heating and Ventilation Controls
Heating And Ventilation Controls
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
NOTE:
-
Heating and ventilation controls consist of two separable housings. Before removing controls, set rotary control knobs to the following positions:
-
Heater control to "cold"
-
Blower control to "0"
-
Air flow direction control to "footwell"
-
Remove radio.
-
Remove long screws - 2 - and short screws - 3 - and remove controls - 1 - from center console.