GLI L4-2.0L Turbo (BPY) (2008)
/Page-1439001.png)
Control Assembly: Service and Repair
Air Distribution Door Adjusting Unit
Air Distribution Door Adjusting Unit
Removing
CAUTION!
‹› Switch off all electrical consumers.
‹› Switch ignition off and remove ignition key.
-
Remove instrument panel
-
Unclip flex cable --> [ Air Distribution Control Flexible Cable ] See: Air Door/Air Door Cable/Service and Repair
-
Remove screws - 1 - and remove adjustment unit.
Installing
-
Arrows on toothed gears must align with each other.
-
Position adjustment unit and tighten screws - 1 -.
‹› After installing, check air distribution door function --> [ Air Distribution Control Flexible Cable ] See: Air Door/Air Door Cable/Service and
Repair
