GLI L4-2.0L Turbo (BPY) (2008)
CAUTION!
‹› Scalding danger!
‹› The cooling system is pressurized when the engine is warm. Wear gloves and other protection and carefully release system pressure if
necessary before performing repairs.
-
Clamp off coolant hoses - 1 - using Hose clamps, up to 40 mm. (3093) and disconnect coolant hoses to heater core.
-
Connect a section of hose - A - onto upper connection.
-
Hold suitable container - B - under lower connection - C -.
-
Using a compressed air gun, carefully blow residual coolant from heater core at heater core connection.
CAUTION!
‹› Frostbite danger!
‹› High pressure refrigerant may leak out if refrigerant circuit is not discharged.
‹› Always evacuate refrigerant prior to opening refrigerant circuit.
-
From engine compartment, remove bolts (12 Nm) - 1 - for refrigerant lines - 2 -.