GLI L4-2.0L Turbo (BPY) (2008)
Timing Belt: Service and Repair
Toothed Belt Assembly Overview, with Divided Toothed Belt Guard
Toothed Belt Assembly Overview, with Divided Toothed Belt Guard
‹› Vehicles from 01/2006 have a new toothed belt guard. Identification: The upper toothed belt guard does not have cover and the guard is divided in
the engine mount bracket area. Vehicles without divided toothed belt guard assembly overview. Refer to --> [ Toothed Belt Assembly Overview,
without Divided Toothed Belt Guard ] See: Toothed Belt Assembly Overview, without Divided Toothed Belt Guard.
1
Bolt, 10 Nm
2
Upper Toothed Belt Guard
3
Bolt, 50 Nm + 180° (1/2) additional turn
‹› Always replace.
‹› Use the retainer (3036) to loosen and tighten.
4
Camshaft Gear
‹› Installed position secured by a woodruff key.
5
Bolt, 10 Nm
‹› Install with locking fluid (AMV 185 101 A1).
6
Rear Toothed Belt Guard