GLI L4-2.0L Turbo (BPY) (2008)
-
Release the tension on the toothed belt again.
-
Tension the toothed belt until notch and tab align.
-
Tighten the semi automatic tensioner roller nut.
‹› Tightening specification: 25 Nm
-
Rotate the crankshaft two additional turns in direction of engine rotation until the engine is again at TDC. For this it is necessary that the last 45°
(1/8 rotation) is turned without interruption.
-
Check the tension of the toothed belt again.
‹› Specified value: Tab and notch align.
-
Check the TDC markings - arrows - again.