GLI L4-2.0L Turbo (BPY) (2008)
NOTE:
-
Make sure that crimp connections do not lie directly next to each other when several wires need to be repaired. Arrange crimp connections at a
slight offset so that the circumference of the wiring harness does not become too large.
-
In the event the repair point was previous taped, this point must be taped anew with yellow insulating tape after repairs.
-
Secure the repaired wiring harness if necessary with a cable tie to prevent flapping noises while driving.
Wire Break With Dual Repair Point
Wire Break With Dual Repair Point