GLI L4-2.0L Turbo (BPY) (2008)
Oxygen Sensor: Removal and Replacement
4-Pin Oxygen Sensor
4-Pin Oxygen Sensor
NOTE:
-
Use the faulty sensor as a guide for installing all of the accompanying attachments, cable ties or marking bands.
-
Do not repair the oxygen sensor wires. Repairing may result in malfunctions.
-
If necessary, identify the oxygen sensor by the protective pipe.
-
Remove the faulty oxygen sensor.
-
Lay both of the oxygen sensor next to each other so the sensor housings are the same level.