GLI L4-2.0L Turbo (BPY) (2008)
-
Using locking pliers, remove the shear bolts. Discard the shear bolts.
-
Insert a screwdriver - A - between the protective housing and the retaining plate - arrow -.
-
Using a screwdriver - A -, pry the protective housing upward and sideways to remove from the retaining plate - arrow -.
-
Disconnect the forward electrical harness connector - 1 -.
-
Lift up the locking mechanism - 2 - slightly.
-
Remove the Motronic Engine Control Module (ECM) (J220) from the retainer - arrow -.