GLI L4-2.0L Turbo (BPY) (2008)
Fuel Rail: Service and Repair
Fuel Rail Assembly Overview
Fuel Rail Assembly Overview
1
Cylinder 1 Fuel Injector (N30) to Cylinder 4 Fuel Injector (N33)
‹› Removing and installing, refer to --> [ Fuel Injectors ] See: Fuel Injector/Service and Repair/Fuel Injectors.
2
Bolt, 5 Nm
3
Fuel Rail
‹› Removing and installing, refer to --> [ Fuel Rail ] See: Fuel Rail.
4
Plate Nut
5
Pressure Relief Valve, 30 Nm
‹› To remove and install, remove the intake manifold. Refer to --> [ Intake Manifold ] See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold.
6
Low Pressure Fuel Pipe
‹› Do not install when under tension.
‹› Tighten the union nut to 20 Nm.
7
Bracket