GLI L4-2.0L Turbo (BPY) (2008)
-
Pry up the locking mechanism - 2 - slightly.
-
Slide the ECM out of the retainer - arrow -.
-
Disengage the rear electrical connector from the ECM and disconnect it.
Installing
-
Connect the rear electrical connector to the ECM and engage it.
-
Slide the ECM into the retainer.
-
Press the locking mechanism - 2 - against the ECM.
-
Connect the front electrical connector - 1 - to the ECM and engage it.
-
Slide the protective housing onto the retaining plate.
-
Tighten the shear bolts - 1 - uniformly until the bolt heads shear off.