GLI L4-2.0L Turbo (BPY) (2008)
Fuel Pressure Sensor/Switch: Service and Repair
Fuel Pressure Sensor
Special tools, testers and auxiliary items required
-
Assembly tool T10118
-
Socket wrench insert 27 mm VAS 5301/7
Removing
-
Reduce pressure in the fuel system high pressure area.
-
Remove coolant pipe and oil dipstick guide tube from intake manifold - arrows -.
-
Press oil dipstick tube down and to the right - arrow -.
-
Disengage connector from Fuel Pressure Sensor G247 using assembly tool T10118.
CAUTION: Fuel rail is pressurized. Wear protective goggles and protective clothing to prevent injuries and contact with skin. Before
loosening Fuel Pressure Sensor G247, place a rag around the connection point. Then release pressure by carefully loosening.
-
Remove Fuel Pressure Sensor G247 using socket wrench insert 27 mm VAS 5301/7.
Installing
Installation is in reverse order of removal, note the following: