GLI L4-2.0L Turbo (BPY) (2008)
Electronic Throttle Control Module: Removal and Replacement
Throttle Valve Control Module
Removing
-
Remove engine cover/air filter.
-
Remove pipe - A - and hose - B - - arrows -.
-
Remove intake air elbow with coolant fans.
-
Disconnect connector from Charge Air Pressure Sensor G31 - 3 -
-
Remove bolts - 2 - and - 4 -.
-
Loosen clamp - 1 -, disconnect quick-release coupling on charge air cooler and remove the charge air pipe with the hose downward.
-
Remove coolant pipe and oil dipstick guide from intake manifold - arrows - and remove oil dipstick guide from engine.
-
Remove four bolts of Throttle Valve Control Module J338 and remove them.
Installing