GLI L4-2.0L Turbo (BPY) (2008)
‹› A printout is available. Press the "print" button if required.
Selecting Diagnosis Function
-
Press the button "02 - Check DTC memory" on the display.
-
If no malfunction is stored in the Engine Control Module (ECM), " 0 DTC(s) detected" is displayed.
-
If malfunctions are stored in the ECM, these are shown one below another on the display.
-
Press the <- key.
-
Press the button "05 - Erase DTC memory" on the display.
-
Press the function "06 - End output".
‹› If the Diagnostic Trouble Code (DTC) memory was erased, generate a readiness code. Refer to "Guided Function".