GLI L4-2.0L Turbo (BPY) (2008)
‹› Removing and installing the left seat belt latch is described. The same instructions apply for removal and installation for seat belt latch of right
seat.
Removing
-
Remove front seat. Refer to => [ Front Seat ] See: Body and Frame/Seats/Service and Repair/Front Seats/Front Seat.
-
Position seat into rearmost seat position.
-
Disconnect wiring harness to seat frame seat belt latch.
-
Remove cover cap from seat rails.
-
Remove bolt - 1 - (20 Nm).
‹› Bolt is micro-encapsulated and must be replaced after each loosening.
‹› Before installing the new bolt, threads on nut must be cleaned, re-cut if necessary.
-
Pull seat belt latch - 2 - out of mount in seat rail - arrow -.
Installing
To install, perform the steps used for removal in reverse order.
Front Seat Belts
Seat Belts