GLI L4-2.0L Turbo (BPY) (2008)
/Page-908002.png)
-
Always replace seal - arrow -.
Oil and Filter, Changing
-
Follow sequence of each of the following instructions until oil change is completed.
-
Connect VAS tester and identify vehicle in Guided Functions.
-
Direct Shift Transmission
-
Check Oil Level
Only start engine when requested to do so. Not now.
-
Place drip tray (V.A.G 1306) underneath transmission.
-
Connect (VW Tester) and press Check Oil Level in Guided Functions.
-
Remove filter housing - arrow -.
