GLI L4-2.0L Turbo (BPY) (2008)
-
Replace oil pump gasket - B - on transmission.
‹› The 2 alignment pins - C - must be located in transmission housing.
-
Slide oil pump - 1 - onto driveshaft while paying attention to oil pump/driveshaft splines.
-
Pay attention to correct positioning of oil pump - 1 - on transmission housing alignment pins.
-
Install new bolts - arrows - hand-tight and then tighten to 5 Nm plus an additional 90° (1/4 turn) in diagonal sequence.
-
Set new oil pump cover - A - in place and tighten new bolts - arrows - in diagonal sequence and in multiple stages to 8 Nm.