GLI L4-2.0L Turbo (BPY) (2008)
Torque Converter Bearing/Bushing: Service and Repair
Crankshaft Needle Bearings
Special tools, testers and auxiliary items required
‹› Drift (VW 207C) or centering mandrel (3176)
‹› Adapter (T10055/3)
‹› Kukko extractor 14.5-18.5 mm (21/2)
‹› Puller (T10055)
‹› For vehicles with a DSG transmission, the needle bearing must be installed in the crankshaft end on the flywheel side.
Removing
-
Pull out the needle bearing using the (Kukko 21/2) - arrow -, (T10055/3) and the (T10055).
Installing
‹› The side of the needle bearing with the writing on it must be readable when installed.
-
Drive in using the (VW 207C) or the (3176).
Installed depth: