GLI L4-2.0L Turbo (BPY) (2008)
Clutch Pedal Assembly: Service and Repair
Over-Center Spring
Over-Center Spring
Special tools, testers and auxiliary items required
‹› Assembly tool (T10178)
Removing
‹› Before disconnecting the battery, retrieve the coding for radio devices with anti-theft coding.
‹› Disconnect battery ground (GND) cable with ignition switched off.
‹› When reconnecting battery
‹› Lubricate the various bearing and contact surfaces with grease (G 000 450 02).
-
Slide driver's seat as far to the rear as possible and set steering wheel to the highest position.
-
Remove cover in driver's side foot well and left driver's side trim
-
Remove crash brace - 1 - in front of clutch pedal, to do so remove nuts - 2 -.
-
Remove clutch pedal - 1 - from mounting bracket - 3 -, to do so remove nut - 2 - and pull out bolt - 5 -.