GLI L4-2.0L Turbo (BPY) (2008)
-
Move selector shaft to neutral position, lock elbow - arrow - must not be engaged.
-
Remove switch for back up lights - 1 -.
-
Remove mounting screw - 2 -.
-
Remove bolts - 3 -.
-
Pull selector mechanism - 4 - out of transmission housing.
-
Remove securing bolt for left and right flange shaft, to do so screw two bolts in flange and counter hold using a pry bar.
-
Pull out flange shafts with compression spring.
-
Remove bolts - B - inside clutch housing for securing clutch housing to transmission housing.