GLI L4-2.0L Turbo (BPY) (2008)
-
Fill area between sealing lip and dust lip halfway with sealing grease (G 052 128 A1).
-
Insert flange shaft, secure with conical head bolt and tighten conical head bolt to 33 Nm.
-
Install left drive axle.
-
Install front section of left front wheel housing liner
-
Install wheel
-
Check gear oil --> [ Transmission Oil, Checking ] See: Service and Repair/Procedures/Transmission Oil, Checking.
-
Install sound insulation
Tightening Specifications