GLI L4-2.0L Turbo (BPY) (2008)
Windshield Washer Pump: Service and Repair
Windshield And Rear Window Washer Pump V59, Removing And Installing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
Removing
-
Remove front bumper cover.
NOTE: To avoid interchanging the washer fluid line connections on the Windshield and Rear Window Washer Pump V59, the connections on the
pump and hose lines are color-coded. Hose connector pieces must be connected to the corresponding colored pump connections during
installation.
-
To release, twist securing clips at hose connections - 3 - and - 5 - and disconnect them from Windshield and Rear Window Washer Pump V59 - 4
-.
-
Collect the draining fluid in a suitable container.
-
Remove the Windshield and Rear Window Washer Pump V59 - 4 - upward out of the reservoir.
-
Disconnect electrical connection - 2 -.
Installing