GLI L4-2.0L Turbo (BPY) (2008)
Wiper Motor: Service and Repair
Windshield Wiper Motor, Installing In Wiper Frame
Windshield Wiper System
Windshield Wiper Motor, Installing in Wiper Frame
Procedure
-
Insert the Windshield Wiper Motor (V) with the Wiper Motor Control Module (J400) into the wiper frame and secure it with the mounting bolts -
arrows -.
-
Tighten all threaded connections to the specified values. Refer to --> [ Windshield Washer System Tightening Specifications ] See: Specifications.
-
Place the motor crank - 1 - on the Windshield Wiper Motor (V) shaft.
Distance - a - to stop - 2 - must be 3 ± 1 mm.
-
Attach the motor crank to the Windshield Wiper Motor (V) shaft using the mounting nut - 3 -.
-
Tighten all threaded connections to the specified values. Refer to --> [ Windshield Washer System Tightening Specifications ] See: Specifications.