GLI L4-2.0L Turbo (CBFA) (2010)
^
Select Vehicle Self-Diagnosis.
^
Select on Board Diagnostics (OBD).
^
Select 37 - Navigation.
^
Verify the software is not 380/ 382 or higher.
Tip:
If software level is found to be at 380 / 382 or higher, this technical bulletin DOES NOT apply, further diagnosis is required.
Update Programming
Tip:
^
During the programming of the navigation unit, the screen will go blank several times. This is considered normal.
^
If the screen goes blank for more than 30 seconds, press the power button on the navigation unit to resume display.
^
If you receive an error due to "Amp clamp State", then remove the key.
Reprogram navigation unit with CD - Literature Number: RNS510FLSH0380.
^
The key must be removed from the ignition with no disc in the radio.
^
Insert programming CD Part No. RNS51OFLSHO380 in to the radio.
This screen will display showing that the disc has loaded properly.