GLI L4-2.0L Turbo (CCTA) (2008)
Navigation Display: Service and Repair
Radio Navigation System
NOTE:
-
The replacement part number is printed on a sticker on the unit housing. Always confirm proper application.
-
Before removing radio unit, obtain anti-theft security code from customer. If unit is replaced, ensure anti-theft security code is activated (see
owners manual). Give new code number to customer.
-
If a Radio/Navigation unit from a vehicle is installed into a different vehicle, it is essential that the part number of the replacement unit is the same
as unit previously installed. Otherwise the Navigation system will malfunction due to turn angle sensor settings in the Radio/Navigation unit that
are incompatible with the vehicle.
Special tools, testers and auxiliary items required
-
Trim removal wedge 3409
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove any DVDs which may have been left in Navigation drive See Owners Manual.
-
Remove center instrument panel trim with air outlets so that radio panel screws are accessible.
-
Remove screws - arrows -.