GLI L4-2.0L Turbo (CCTA) (2008)
Remote Control: Service and Repair
Multifunction Steering Wheel Control Module
Multifunction Steering Wheel Control Module
Removing
CAUTION:
-
Special safety precautions apply to vehicles equipped with airbags.
-
Electrostatically discharge yourself before working on the airbag unit. This can be accomplished by touching an grounded metal object
such as a water pipe, heater pipe or metal support.
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Disconnect negative (-) battery terminal.
-
Remove drivers airbag.
-
Disconnect both electrical connections at control module.
-
Using a suitable screwdriver, carefully pry out the control module - arrow -.
Installing
Install in reverse order of removal.
-
Code control module for steering column electronics.